Menu

Home » Components » ZIF-Clip® Digital Headstages

ZIF-Clip® Digital Headstages

TDT’s patented ZIF-Clip® technology, built with Intan’s highly integrated amplifier chip, yields a low noise electrode recording interface with a single replaceable cable and a zero insertion force connection.

Configured for high and low impedance recordings; the ZD ZIF-Clip® headstages are designed to work directly with our best and most versatile amplifier—the PZ5 multimodal NeuroDigitizer.

Research Uses

Product Specs

Resources

  • Auditory neuroscience
  • Awake behaving recordings
  • Electrophysiology
  • High and low count neurophysiology

ZIF-Clip® Digital Headstage Specifications Sheet

ZIF-Clip® Digital Headstage Fast Facts

ZIF-Clip® Digital Headstage User Manual

High Channel Count Recordings, Miniature Technology Design

The miniature electronics contained within the headstage allow for high channel densities while maintaining an extremely compact structure. Suitable for both large and small animals and available in 32, 64 and 96 channel versions, our high and low channel mini devices can pass all full bandwidth signals using minimal wired connections. Fewer wires means reduced wiring complexity and increased reliability.

i.e. Our ZD96 is a 96 channel device that can pass all 96 full bandwidth signals using just 13 wired connections.

Minimize Down-Time and Increase Lab Efficiency with Detachable Digital Headstage Cables

Damage due to cable snags and bites no longer requires return or replacement of the entire headstage – TDT’s ZIF-Clip® Digital Headstages come with fully detachable cables to allow fast, convenient replacement for researchers working with behaving animals. These headstages are small and lightweight, and the detachable cables will lower long-term costs and minimize downtime in your lab.

ZIF-Clip® Digital Headstage with the PZ5 multimodal NeuroDigitizer

The ZD ZIF-Clip® headstages are designed to work directly with our multimodal NeuroDigitizer. The PZ5 can be configured for both analog and digital inputs and high and low impedance recordings, making it both powerful and efficient.

ZIF-Clip® headstage connection to high density connector probe

Digital ZIF-Clip® headstage, O-rings and ZIF-Clip® adapter

Connect probes and adapter to the headstage.

The ZIF-Clip® headstage must be held in the fully opened position while being slid into place.

Lock the ZIF-Clip® Headstage in place

Press the front of the headstage together as shown to lock the connector in place. You should hear an audible click when the locking mechanism is engaged.

Use O-rings for additional connection security

Once the connection is secure, roll the o-ring forward until it settles into the sleeve on the front of the headstage.

Ease of Connection with the ZIF-Clip® Headstage Holder

The ZIF-Clip® holder simplifies electrode insertion by securing your ZIF-Clip® headstage firmly, enabling use with most micromanipulators. Each holder uses a 3/32″ diameter, 3″ length rod and is designed for use with the specified ZIF-Clip® headstage dimension.

Related Components

PZ5 Flexible Amplifiers

ZIF-Clip® Based Electrodes

ZIF-Clip® Headstage Adapters

FB128 Neural Simulator

ACO Motorized Commutators